Generators for industrial pulsed immunity
Share:

Generators for industrial pulsed immunity

 

We have a wide range of simulators and accessories for all pulsed immunity tests according to industrial standards for equipment under test with power consumption up to 100A.

Description

There are a multitude of conducted transient disturbances that can affect the proper functioning of electronic equipment that is usually connected to power, signal or data networks.

These disturbances have been standardized so that it is mandatory for any product integrating electronics to pass the corresponding pulsed immunity tests (Fast Transients, Shock Waves, Electrostatic Discharges,…) in order to obtain CE marking.

We currently have a wide range of simulators and accessories for all pulsed immunity tests according to industrial standards for equipment under test with power consumption up to 100A thanks to our technology partner EMTEST:

  • Compact simulators for EN 61000-4-4/-5/-5/-8/-9/-11/-12/-29 tests:

Compact simulator model CompactNX5 / CompactNX7 / NSG 3060A

New multifunction compact generators up to 7 kV for immunity testing according to international, national and manufacturer’s standards: IEC 61000-4-4, 4-5, 4-8, 4-9, 4-11, 4-12, 4-29, 4-29, …

Electrostatic discharge (ESD) generators according to EN 61000-4-2:


– DITO Electrostatic Discharge Gun (16kV)

– Electrostatic Discharge System ESD30N (30kV)

Fast transient generators (EFT) and accessories according to EN 61000-4-4:

– EFT500N5 (Bursts up to 4.8kV) / EFT500N8 (Bursts up to 7kV)


Surge generator according to EN 61000-4-5:

– VCS500N4 (Surge up to 4.4kV) / VCS500N8 (Surge up to 8kV) / VCS500N12 (Surge up to 12kV)

Surge generator for telecommunication equipment:


– VCS500N47T (Shock waves up to 7kV)

Power outage and interruption simulator according to EN 61000-4-11:

– PFS503 three-phase simulator

– Single-phase and three-phase Variac motorized transformers

Damped oscillatory wave generator and “Ringwave” according to EN 61000-4-12 and EN 61000-4-18:


– OCS500N6 (6kV)

Power disturbance generator according to EN 61000-4-13/-14/-14/-17/-28/-29.


– Programmable AC/DC 7KVA power supply NETWAVE 7

Software for test management and report generation.

– iec.control

– esd.control

Coupling/uncoupling devices for power and data lines (CDN’s, capacitive coupling clamps, etc.) (CDN`s, Capacitive Coupling Clamps, etc)

NetWave .5 models, simulator for testing HV components above 560 VDC. The new NetWave .5 models are based on the existing NetWave .3 models, and include improvements mainly related to isolation voltage and floating output configuration.

Other products you may be interested in

  • Radiated and conducted immunity

     

    EMC regulations establish limits of conducted and radiated disturbances to which electronic products must be immune, they vary depending on the sector.
  • camara-anechoic
    Anechoic chambers for RF and MW measurements

     

    RF/MW anechoic chambers are test enclosures in which the aim is to reproduce free space transmission conditions.
  • Power analyzers / wattmeters

      The power analyzer measures the electrical power characteristics of devices that generate, transform or consume electricity.

  • Radiated and conducted emissions

      All equipment whose operation involves the use of electrical energy is susceptible to generate electromagnetic emissions radiated or conducted through its power or data lines and may interfere with the operation of nearby equipment.