Equipment and parts for the aerospace industry are subjected during their lifetime not only to temperature changes, but also to pressure changes. To ensure that they withstand these conditions, we have altitude chambers.
Share:

Altitude cameras

 

Equipment and parts for the aerospace industry are subjected during their lifetime not only to temperature changes, but also to pressure changes. To ensure that they withstand these conditions, we have altitude chambers.

Description

Equipment and parts for the aeronautical industry are subjected during their service life not only to changes in temperature, but also to changes in pressure. In order to ensure that they withstand these conditions, we have altitude chambers.

Vacuum, temperature and altitude tests within the atmosphere, vacuum up to 1mbar, with temperature ranges from -70ºC to 180ºC.

Documents

Doc 1 altitude cameras

Other products you may be interested in

  • The generic ACS climatic chambers have standard temperature ranges between -75ºC and +180ºC, separated into two large families according to their internal volume: Compact and Visitable; both in climatic and thermostatic versions.
    Climatic chambers

      The generic ACS climatic chambers have standard temperature ranges between -75ºC and +180ºC, separated into two large families according to their internal volume: Compact and Visitable; both in climatic and thermostatic versions.

  • Thermal shock test chambers subject the samples under test to extremely abrupt temperature changes (tens of degrees in seconds), so that the materials react by rapidly expanding or contracting.
    Thermal shock chambers

     

    Thermal shock test chambers subject the samples under test to extremely abrupt temperature changes (tens of degrees in seconds), so that the materials react by rapidly expanding or contracting.
  • Angelantoni DCTC series salt spray chambers to simulate corrosion processes on painted and/or metallic surfaces in the laboratory.
    Salt fog chambers

      Angelantoni's DCTC series salt spray chambers are used to simulate corrosion processes on painted and/or metallic surfaces in the laboratory. These chambers allow the performance of corrosion tests according to UNI 9399 (Filiform Corrosion) and UNI 9590 (Scab Corrosion) standards.

  • The chambers for combined climate-vibration tests are today one of the flagships of the environmental testing department of Alava Ingenieros.
    Combined cameras with vibration

      The chambers for combined climate-vibration tests are today one of the flagships of the environmental testing department of Álava Ingenieros.