The system also allows daily measurements on hazardous machinery or machinery located in hard-to-reach places. It has been tested in a number of different types of plants including power, steel, food, paper, petrochemical and automotive industries.
WIRELESS VIBRATION SENSOR
– Transmits over long distances (up to 800 m)
– Eliminates cable runs
– Easy to install
– Available in certified version
– CSA Class 1 Division 2
WIRELESS JUNCTION BOX
– Converts existing sensors to Wireless
– 24 Vdc or battery power supply.
– Works with another box with BNC’s
– Available in version with certification
– CSA Class 1 Division 2
WIRELESS RECEIVER
– No additional repeaters or gateways required
– TCP/IP ethernet output
– Easy to install
– Connection to Echo Modbus Server
Specifications
The system displays the following main measurements:
– RMS Velocity: Allows to identify low frequency faults such as misalignment or unbalance.
– Peak Velocity: It is the RMS velocity value multiplied by 1.44 and identifies also low frequency faults.
– RMS Acceleration: Allows to identify high frequency faults such as broken bars in electric motors.
– True Peak Acceleration: It is the highest acceleration value captured in the form of a peak acceleration value multiplied by 1.44 and identifies also high frequency faults. Peak Acceleration: It is the RMS acceleration value multiplied by 1.44 and also identifies high frequency faults.
– True Peak Acceleration: It is the highest acceleration value captured in the waveform and allows identifying high frequency impacts such as defects in ball bearings or gears.
– Crest Factor: It is the ratio of True Peak in relation to RMS acceleration and is used as an indicator of the severity of the faults.
Documents
Other products you may be interested in
-
Kits for installation of fixed vibration sensors on machinery
Preditec/IRM offers instrumentation kits for the installation of fixed vibration sensors on machinery to take…
-
Portable vibration sensor calibrator
Calibrator for all types of vibration sensors: accelerometers, velocity sensors and displacement probes.
-
Manual accelerometer calibrator
With the handheld accelerometer calibrator you can verify on-site the correct functioning of your absolute…
