- Permanently installed under the end stator winding wedges (on existing machines) or between the top and bottom bars (on new machines or rewinders)
- They are not connected to the high voltage winding and are not subjected to high electrical voltages.
- Manufactured in epoxy glass laminate, NEMA FR4 (class F)
- 10-1000 MHz bandwidth (3 dB cut-off)
- 50 Ω impedance
- Double output to distinguish the slots of partial discharges on the winding winding head
- 2.0 mm thick, width cut to fit into stator slot, length adjustable to 53 cm (17.5 in.)
Documents
Other products you may be interested in
-
Rotary Flow Sensors
Rotor flux sensors detect the magnetic flux emanating from each rotor pole in synchronous generators…
-
AirGap sensors
AirGap Capacitive Sensors measure the distance between the rotor and stator in hydroelectric generators to…
-
Epoxy Mica Couplers
Iris Power's Epoxy Mica Capacitors (EMCs) are designed to detect partial discharge (PD) activity.
-
Evaii Fiber Optic Accelerometers
Non-metallic fiber optic accelerometers for measuring and analyzing stator winding head vibrations for generators.
