- Ideal for measurement on predictive inspection routes and advanced analytics
- Long battery life
- Very light: 780 g
- Memory: 8 GB
- Color display: 240 x 320 pixels
Modular system
The PRE5135 can be configured according to your needs by choosing only the modules you require:
- Field analyzer
- Routes
- Field balancing
- Recorder (3×AC ch + 3×DC ch 1×tach)
Optional modules can be purchased at a later date by activating them on the equipment without the need to send it to the factory.
Triaxial sensor
This equipment has three input signal channels and a tachometer input. This facilitates connection to triaxial sensors (optional) and vibration measurement can be performed simultaneously.
Automatic diagnostics
The built-in expert system automatically detects machine faults such as unbalance faults, backlash, misalignment and bearing defects.
Built-in pyrometer and stroboscope
The collector incorporates a non-contact infrared temperature sensor (for immediate bearing temperature measurement).
It also incorporates LED lights with configurable flashing frequency (stroboscope function), which can be operated with one hand.
Comfortable and practical
With a weight of only 780 g and an autonomy of more than 10 hours of operation, the unit is fully suitable for extensive predictive inspection route measurements.
Recorder module
The recorder module allows recordings of up to 1000 MB that can later be replayed using the Virtual Unit Analyzer (request demo).
Specifications
Measurements
Data processing
- Real time FFT
- DEMOD – ENVELOPE analysis
- ACMT – low speed bearing analysis
- Order analysis
- User band pass analysis
- RPM measurement
- DC measurement
- Orbit measurement
A/D Conversion
- 24 Bit a/D conversion
- 64 Bit signal processing
- 120 dB Dynamic range
- No Auto-Gain
Ideal for route measurement
- Heavy-Duty aluminum case
- Removable li-ion battery pack
- More than 10 hours of operation
- Colour display 240 x 320 px
- FFT resolution: 25600 lines
- Route memory: 8G
Top Panel
- ACC ICP – Sensor input
- 2 Signal input connectors AC/DC (IN1,IN2)
- Input IN2 is ready for triaxial sensor (3 simultaneous channels)
- Input for tacho/trigger
- IR non-contact temperature sensor
- LED stroboscope/torch
Technical Specifications
Input channels:
- 3 AC, ICP® power supply on/off
- 3 DC for process values
- 1 TACHO for external trigger
Input range:
- AC +/- 12 V peak-peak-peak
- DC +/- 24V
AD conversion:
- 24 bit, 64 bit internal signal processing
- No AutoGain function!
Dynamic range S/N: 120 dB
Frequency ranges:
- Maximum range: 1 Hz – 90 kHz (1 Ch, 194 kHz sampling)
- Maximum range: 1 Hz – 25 kHz (3 Ch, 64 kHz sampling)
- Minimum range: 1 Hz – 25 Hz (3 Ch, 64 Hz sampling)
Sampling mode: Fully simultaneous for 3 channels
FFT resolution:
- Min. 25 lines
- Max. 25 600 lines
Unit modes:
- Analyzer – analytic measurement
- Data collector – route measurement
- Balancer
- LED stroboscope, LED torch
- FASIT – Expert system for fault detection
- Vibration meter
- Data processing:
Real time:
- FFT
- DEMOD – ENVELOPE analysis
- ACMT – low speed bearing analysis
- Order analysis
- User band pass analysis
- RPM measurement
- DC measurement
- Orbit measurement
Trigger:
- Manual, External, Signal level, Time
- Use for signal recording trigger
- Speed change, Time interval
Display: Colour 240 x 320 pixels, TFT
Communication: USB Temperature range: -10 ̊C to +50 ̊C
Power: Battery 10 hours of operation, AC 230 V
Case: Aluminium heavy duty
Other products you may be interested in
-
Vibration collector VA5PRO
The Vibration Analyzer VA5 is a multifunctional tool to analyze machinery. Balancing, thermographic camera, Ultrasonic,…
-
Vibration collector VA3 PRO EX
A4300 VA3 Pro Ex is a portable device for machine vibration, diagnostics and balancing.
-
Vibration collector PRE5050M ATEX
New portable collector for work in areas with explosive atmosphere, complying with Directive 94/9/EC ATEX:…
-
Vibration collector PRE5050M
The PRE5050M portable collector for predictive maintenance is the most complete, economical and simple system…
