Input channels:
4 x AC, ICP® power supply on/off
4 x DC for process values
1 x TACO for speed probe / external trigger

Input range:
AC +/- 12 V peak-peak
DC +/- 24VDC AD conversion:24 bit, 64 bit internal signal processor
No AutoGain function

Dynamic range S/N: 120 dB

Frequency ranges (-3 dB):
Maximum range: 0.35 Hz – 90 kHz (1 channel, 194 kHz sampling)
Maximum range: 0.35 Hz – 25 kHz (4 channels, 64 Hz sampling)
Minimum range: 0.35 Hz – 25 Hz (4 channels, 64 Hz sampling)

Sampling mode: Fully simultaneous for all 4 channels

FFT resolution: Min. 100 lines
Max. 3 276 800 lines

Equipment modes:
Analyzer – analytical measurements
Data collector – path measurements
Balancing – 1 and 2 plane on site balancing
Run up – acceleration and deceleration measurements
Recorder – direct signal recording for post-analysis
Stethoscope – for listening to bearings/machine sounds
FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection FASIT – expert system for automatic fault detection expert system for automatic fault detection
Octave analysis – measurement of audible sounds
Impact test – measurement of natural frequencies
ADS – animated deflection shapes (operation of deflection shapes)
Ultrasound – ultrasound measurement in range 30 – 50 kHz
Camera
IR camera

Gallery Display:1125 x 800

pixelsCamera: 5 MPx, autofocus

Thermographic Camera (optional):
384 x 288 pixels
-10°C ~ 150°C temp.
50 mK NETD sensitivity

Processor: Intel Atom 1.9 GHz

Memory, Route: 64 GB for recorder, 16 GB for routes

Data processing:
Real time FFT
DEMOD – ENVELOPE analysis
ACMT – low speed bearing analysis
Order analysis
User’s bandpass analysis
RPM measurements
DC measurements
Orbital measurements

Direct signal recorder:
64 kHz sampling rate
4-channel memory consumption – 3 GB/hour
4-channel total recording – 20 hours

Triggering: Manual, External, Signal level, Time. Use for signal recording trigger to change speed, time interval.

Interface: USB 3.0, compatible with 2.0

Operating temperature range:-10˚C to +50˚C.

Power: Battery pack with approximately 8 continuous hours of operation

Sheath: Heavy-duty aluminum

Size & Weight: 280 x 205 x 55 mm, 2200 g

Languages: English, Spanish, German, French, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai