Vibration collector PRE5050M

Vibration collector PRE5050M
Share:

Vibration collector PRE5050M

The PRE5050M portable collector for predictive maintenance is the most complete, economical and simple system to perform predictive maintenance on your machines.

The PRE5050M portable analyzer collector in combination with the PRE5050SW predictive software enables monitoring of vibration level and bearing condition, temperature level, rotational frequency, spectral analysis and waveform analysis.

It is a user-friendly instrument for vibration measurements and monitoring of the general condition of rotating machinery.

The equipment includes a standard vibration sensor, an infrared temperature sensor and LED strobe light to measure shaft rotation speed.

This system of collector plus predictive software serves as the technological basis for the PrediPack Starter predictive maintenance implementation package.

Preditec helps you to select your equipment through a form, click here to access the questionnaire.

Specifications

Input: 1x ICP® powered accelerometer

Input range: 60 g PEAK with standard 100mV/g sensor (e.g.600g PEAK for 10mV/g sensor, the sensitivity is editable in the unit)

Measurements:

  • Velocity RMS 10 – 1 000 Hz [mm/s, ips].
  • Velocity Peak 10 – 1 000 Hz [mm/s, ips].
  • Acceleration RMS 500 – 16 000 Hz [g]
  • Acceleration Peak 500 – 16 000 Hz [g]
  • Velocity time 1 – 1 000 Hz [mm/s, ips] 2048 samples *
  • Velocity spectrum 1 – 1 000 Hz [mm/s, ips] 800 lines
  • Acceleration time 1 – 16 000 Hz [g] 2048 samples *
  • Acceleration spectrum 1 – 16 000 Hz [g] 800 lines *
  • Acceleration Demod-Envelope RMS 500 – 16 000 Hz [g]
  • Acceleration Demod-Envelope Peak 500 – 16 000 Hz [g] *
  • Acceleration Demod-Envelope time 500 – 16 000 Hz [g] 2048 samples
  • Acceleration Demod-Envelope spectrum 500 – 16 000 Hz [g] 800 lines, range 400 Hz *
  • Displacement RMS 2 – 100 Hz [μm, mil].
  • Displacement 0 – Peak 2 – 100 Hz [μm, mil].
  • Displacement Peak – Peak 2 – 100 Hz [μm, mil].
  • Temperature non-contact measurement 0 – 380°C (32 – 716°F)

Further functions:

  • LED stroboscope (0.17 – 300 Hz, 10 – 18 000 RPM)
  • LED torch, non-contact temperature measurement vibration stethoscope
  • Memory: 4 MB for data, 900 measurements of 800 lines spectra or 2048 samples time signals may be stored
  • Data storing (option): Off-Route Route with DDS 2014 software for Vibrio M (free download)
  • Interface: USB 2.0 compatible
  • Software: DDS 2014 software for Vibrio M (free download)
  • Display: color graphic OLED display 128 x 128 pixels, diagonal 1.5″ (38mm)
  • Output: 1x AC signal 8 Ω / 0.5 W for external headphones (signal listening)
  • Power: 2x AA 1.5V batteries (alkaline, NiMH, Lithium – 8 hours operation)
  • Temp: Operating: -5°C to 55°C Dimensions: 150 x 60 x 35 mm
  • Weight: 330 g including batteries (without cable, sensor and magnet) 540 g including batteries, cable, sensor and magnet
  • Accessories: vibration sensor, coiled cable to connect vibration sensor, magnetic base for vibration sensor, headphones with 3.5 mm jack, USB cable, measuring tip for manual pressure on the sensor, transport case, CD with the manual

Other products you may be interested in

  • Vibration collector VA5PRO

    Vibration collector VA5PRO

    The Vibration Analyzer VA5 is a multifunctional tool to analyze machinery. Balancing, thermographic camera, Ultrasonic,…

  • Vibration collector VA3 PRO EX

    Vibration collector VA3 PRO EX

    A4300 VA3 Pro Ex is a portable device for machine vibration, diagnostics and balancing.

  • Vibration Analyzer Collector PRE5135

    Vibration Analyzer Collector PRE5135

    New PRE5135 vibration analyzer collector for predictive diagnosis of critical rotating machinery.

  • Vibration collector PRE5050M ATEX

    Vibration collector PRE5050M ATEX

    New portable collector for work in areas with explosive atmosphere, complying with Directive 94/9/EC ATEX:…