Motor Circuit Analysis™ (MCA™). Motor test instrument
The seventh generation of ALL-TEST PRO equipment represents innovation and proven, patented technology that complements traditional vibration, temperature, and ultrasonic testing methods, providing instant feedback on the health of your engine.
Perform predictive maintenance on electric motors to ensure their reliability in the field and maximize productivity.
ALL-TEST PRO 34™ – Patented technology
Analysis of the MCA™ Motor Circuit
Rapid assessment of the entire motor circuit. A non-destructive, de-energized testing method to evaluate the condition of a motor from the Motor Control Center (MCC) or directly at the motor. Immediate and comprehensive information on the condition of the stator, rotor, connections, contamination, and insulation to ground.
Proprietary dynamic stator and rotor designs
It is used to evaluate the condition of the stator and squirrel-cage rotor in a single test. Ideal for testing new and repaired motors prior to acceptance.
Proprietary Static™ Test (TVS™).
The TVS is a value calculated from the three-phase MCA static test and is used as a reference value for the motor. Common types of faults in the rotor and stator windings will affect the TVS.
Get a quick return on your investment
- Finding a single defect using the AT34™ results in significant cost and production savings.
- Test the motors before installing them to ensure proper installation and prevent them from failing during startup
- Test the engines in the warehouse to make sure they are in good condition and ready for service.
- Troubleshoot motors that have stopped working either from the control panel or directly at the motor.
Engine types
Testing of 3-phase squirrel-cage AC motors <1,000 V.
Condition Assessment
The electrical condition of all motor and generator components is evaluated, including windings and the rotor, as well as associated connections and cables.
Features
On-screen instructions for automatic testing.
Results in less than 3 minutes
Detects issues in the early stages
Tests can be performed from a distance of over 300 meters
MCA Basic™ Software
MCA™ Basic Software.
It is used with 3-phase squirrel-cage AC induction motors <1000 V.
AT34™ vs. Megohmmeter and Voltmeter
Specifications
ALL-TEST PRO 34™ includes:
- 3 test leads with small Kelvin clamps and push-pull connectors
- 1 test lead with a 4 mm safety plug and an MC “Dolphin” clamp
- A charger adapter with a universal input of 100–240 VAC and an output of 9 VDC at 1.7 A
- MCA Basic™ Software Download Certificate
- 1x 1-meter USB cable
- A durable, sturdy hard case with a pre-cut foam insert
- User Manual
- Warranty: 1-year limited warranty; optional 2-year warranty with calibration
Documents
Other products you may be interested in
-
DeltaMaxx™
The DELTAMAXX determines the dielectric power factor, capacitance and partial discharge of generator windings for…
-
DCR-60™
DCR 60- identifies stator ground wall insulation problems by off-line DC high voltage ramp test…
-
Rotary Flow Sensors
Rotor flux sensors detect the magnetic flux emanating from each rotor pole in synchronous generators…
-
AirGap sensors
AirGap Capacitive Sensors measure the distance between the rotor and stator in hydroelectric generators to…
