Level 1

Innovae develops Virtual Reality training simulators that allow organizations to train their workers in a safer, more effective and personalized way. This type of training combines realism, interactivity and autonomy to facilitate learning in industrial and technical contexts where traditional training has limitations.

This course deals with how to diagnose electric motors from the main applicable predictive techniques such as vibration analysis, current, voltage, thermography, ultrasound and partial discharge.

The objectives are to acquire the knowledge of the different dynamic and static predictive techniques that allow the diagnosis of electrical machines and the development of a predictive plan.

Shaft alignment is a tough skill to master. We firmly believe that a person should be trained in dial-indicator methods in order to be successful with laser alignment - but that choice is yours.

Driving Innovation with Human Talent

Learn how to detect and prevent turbomachinery failures before they occur. With our training in predictive techniques, you will master analysis and diagnosis to maximize equipment life and ensure more efficient and cost-effective maintenance.

This course is ideal for those who need to get started in the reliability and improvement of industrial processes.

Train in the use of infrared thermography for early detection of failures in industrial equipment and systems. Learn how to interpret thermal images to optimize predictive maintenance and improve operational efficiency. Some courses are certified by ITC - Infrared Training Center, guaranteeing international recognition.

Specialization course for diagnostics of flexible shaft turbo-machines based on vibration analysis and other physical parameters

Train in the use of this technology for early detection of leaks, mechanical failures and electrical problems in industrial equipment. Learn how to interpret ultrasonic signals to optimize predictive maintenance, improve energy efficiency and increase the operational reliability of your machinery.

These courses provide the tools and strategies to optimize the planning, execution and control of industrial maintenance. Learn how to improve equipment availability, reduce costs and apply methodologies such as predictive and condition-based maintenance for efficient and operational reliability oriented management.

Provides essential knowledge for effective lubrication management in industrial machinery. Learn how to select, apply and monitor lubricants to reduce wear, improve efficiency and extend equipment life. Our courses will help you optimize maintenance and improve operational reliability.

Provides the key methodologies and tools to detect, analyze and prevent failures in industrial equipment. Learn how to interpret vibration data, ultrasound and other parameters to optimize maintenance, reduce downtime and improve the operational reliability of your machinery.

Mobius Institute's official training in vibration analysis, ultrasound and reliability-based asset management, with internationally recognized certification. Delivered by expert instructors, these courses will enable you to develop key skills for fault detection and diagnosis, improving reliability and predictive maintenance in your industry.

Provides advanced knowledge of techniques and tools to ensure correct shaft alignment and rotor balancing in industrial machinery. Learn to reduce vibrations, minimize wear, and optimize equipment performance, improving reliability and operational efficiency.

Shaft alignment is a tough skill to master. We firmly believe that a person should be trained in dial-indicator methods in order to be successful with laser alignment - but that choice is yours.

PRE-7121 Know how to perform ultrasonic inspections in an effective and professional manner to obtain the best results from the application of this technology.

PRE-7110 Advanced diagnosis of electric motors by testing with motor running and motor stopped.

PRE-7161 This course provides a broad overview of predictive techniques and where to apply them to optimize your maintenance plan within the new Industry 4.0 environment.

PRE-7164 This course includes the concepts of Lean Maintenance and the implementation of a TPM (Total Productive Maintenance) maintenance plan based on Autonomous Maintenance.

This course provides the basic ability to apply best lubrication practices and precision lubrication skills to maximize machinery reliability.

The objective of this course is to train the attendees so that they can begin to diagnose the most typical problems of rotating machinery through vibratory analysis, as well as to perform a thermographic inspection correctly.

This course is oriented to the monitoring and diagnosis of failures in flexible shaft turbomachinery (machines that operate above the first critical speed of the shaft), by means of specific multichannel vibration analysis techniques. Tools such as Spectrum Maps, Bode and Nyquist Diagrams, Shaft Centerline Chart (SCL), Orbits, etc. are used and explained for diagnosis, specifically in the understanding and diagnosis of Unbalance (Multiplane), Misalignment, Rocks, Oil Whirl.

PRE 7101 Course on good practices for vibration data collection in the plant.

The Vibration Analyst Category I certification course, developed by Mobius Institute, is designed for technicians beginning their training in predictive vibration diagnostics. Aligned with ISO 18436-2, this program provides the basis for identifying common faults in industrial machinery and optimizing maintenance programs.

PRE-7150 Theoretical and practical course for the diagnosis and correction of balancing problems in rigid shaft rotors for on-site correction.

Introductory course in the measurement and analysis of the dynamic behavior of structures by means of the experimental techniques of: - Experimental Modal Analysis - Operational Modal Analysis - Vibration Modes in Operation.

This course enables lubrication professionals to develop a strategic plan to meet maintenance objectives.

Álava Ingenieros, a company of the Álava Group, is the first Licensed Traning Center (LTC) of the Infrared Training Center (ITC) in Spain.

Training and certification for predictive inspectors who wish to follow the procedures recommended for ultrasonic detection by Mobius Institute.

Preditec's Level II vibration analysis course is designed for technicians and engineers looking to specialize in predictive diagnostics of industrial machinery. With a practical approach, this program allows you to identify common faults such as imbalances, misalignments and bearing problems, optimizing maintenance programs.

This course trains the attendee to be able to perform alignments of coupled shafts using techniques that guarantee alignment accuracy.

iLearnAlignment, interactive online course on shaft alignment.

The ITC (Infrared Training Center) is the main source of knowledge in the field of infrared thermography and its applications.

PRE 7103 Vibration analysis and diagnosis course for experienced analysts.

The vibration analyst Category II certification course, developed by Mobius Institute, is designed for technicians and engineers seeking to specialize in predictive vibration diagnostics. This program, aligned with ISO 18436-2, combines theoretical and practical training to identify faults in industrial machinery and optimize its maintenance.

Course focused entirely on defining the framework of competence in plant lubrication, the design of the most appropriate practices, as well as the control of the tasks and improvements applied.

PRE-7120 For predictive maintenance technicians who want to know how professional thermographers work in order to obtain the best results.

PRE 7104. Combined course of: Vibration Analysis Level II + Wind Turbines.

The Vibration Analyst Category I certification course, developed by Mobius Institute, is designed for technicians beginning their training in predictive vibration diagnostics. Aligned with ISO 18436-2, this program provides the basis for identifying common faults in industrial machinery and optimizing maintenance programs.

iLearnBalancing, interactive online course on imbalance.

At the end of the course, participants will have the knowledge to interpret and investigate lubricant analysis information, justify decision making and recommend actions.

PRE 7104. Course on analysis and diagnosis of vibrations in wind turbines.

This course is intended for the CAT-III vibration analyst with a minimum of 5 years of experience who wants to have a leading role in the condition monitoring team.

The "ARP Asset Reliability" course gathers all the necessary background knowledge on how to improve the reliability and performance of your assets within your organization.

PRE-7135 Adash DDS 2016 Specialization Course is aimed at users who want to get the most out of the different modules of this platform.

The Asset Reliability [ARP-E] "RELIABILITY ENGINEER" course encompasses many of the best aspects of reliability and, once you have completed the course, you gain a very solid knowledge in all areas related to reliability.

PRE-7131 Specialization course for users of CSI's Machinery Health Manager predictive software, compatible with CSI 2130 and 2140 analyzer collectors.

The Asset Reliability Specialist [ARP-L] "RELIABILITY PROGRAM LEADER" course encompasses not only the technical knowledge, but also the roles necessary to be able to lead teams, communicate frequently and clearly, and have strong budget and project management skills.

Mobius Institute offers ISO 18436 Category I, II and III Vibration Analyst training delivered by means of Internet-based, online (or distance) learning courses.